Laptop Slim CD DVD Drive Burner Enclosure / Case (12 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Remi's 9mm laptop DVD drive enclosure, but extended to accommodate 12 mm burners instead and without the need…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 257
- Wydruki
- 2
- Wyświetlenia
- 1859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Remix of Remi's 9mm laptop DVD drive enclosure, but extended to accommodate 12 mm burners instead and without the need for a USB-C board, with 4 slots for 4.6 x 5.7 mm M3 threaded inserts, which are slightly larger than the original's.
Ihighly recommend you use this in conjunction with my front bezel (show in the pictures).
In my fork, the cable from the slimline to USB adapter passes directly through a hole in the enclosure. You may need to re-solder the cable to change its orientation (and maybe use a longer cable). The adapter's board can be screwed to the enclosure, but in my case I had to glue it. You may also need to glue the cable to make it sturdier.
Apart from those main changes I also made the following edits:
- Extended the inner hole of the threaded insert slots to go all the way through the enclosure (saves plastic and allows for longer screws).
- Shortened the front of the case to save plastic and allow for the use of front bevels. Again, I highly recommend this one I remixed.
- Added a small tab to the lid to secure the cable in place and close the hole in the box.
Category: 3D Printing