SAMLA 22 L Filament Spool Holder for 4 Spools (Drybox)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for IKEA SAMLA 22 L: 1×M8 rod, 16×608 bearings, adjustable spool spacing, all parts fully 3D-printable.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Transform your IKEA SAMLA 22 L box into a sleek, adjustable filament storage solution. This holder uses two 320 mm M8 threaded rods and 16 standard 608 bearings for ultra-smooth rotation. All other components are designed for easy 3D printing—no extra hardware needed.
Features
- Minimal Hardware - 2x M8 x 320 mm rod + 16x 608 bearings
- Variable spool width
- Tailored for IKEA SAMLA 22 L
- Swap a single spool without disassembling the whole unit
3D Printed Parts
| File | Qty |
| Base_Female_x2.3mf | 2 |
| Base_Male_x2.3mf | 2 |
| Base_Pillar_x4.3mf | 4 |
| Rod_Washer_x4.3mf | 4 |
| Rod_x1.3mf | 1 |
| Roller_Female_x8.3mf | 8 |
| Roller_Male_x8.3mf | 8 |
| Roller_Washer_x4.3mf | 4 |
| Nut_x4.3mf | 4 |
Print Settings
- PLA (I used SUNLU PLA+ 2.0 White)
- 10 % Infill
- 3 Perimeters
Assembly
Just put everything together. Glue is needed for the Rollers. File down the male base if needed. Use Roller_Washers between each pair of Roller_Male/Roller_Female. The Rod_Washers are used at each side of the Rod, the Rod_Washers and the Rod now matches the height of the Roller_Washers. Don't screw the Nuts to tight.