Vertical enter and exit signs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple enter and exit label sign I made. Uses M4 screws for mounting, but can be glued/tied in place if you want.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Just a simple label plate I made since I couldn't find anything pre-made that fit what I was looking for. Has two M4 screw holes for mounting, which I used to attach them to some conduit clips in the picture. If you don't have a multi-material unit like a Bambu AMS, you can add a pause in your slicer or g-code after the 2mm point to manually change your filament.
Print times on an X1C are as follows (I would add more machines, but unfortunately this is the only machine I have available atm):
Single filament: Enter ~20min, Exit ~18min, both ~31min
With 1 filament change: Enter ~25, Exit ~22min, both ~35min