Vertical enter and exit signs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple enter and exit label sign I made. Uses M4 screws for mounting, but can be glued/tied in place if you want.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Just a simple label plate I made since I couldn't find anything pre-made that fit what I was looking for. Has two M4 screw holes for mounting, which I used to attach them to some conduit clips in the picture. If you don't have a multi-material unit like a Bambu AMS, you can add a pause in your slicer or g-code after the 2mm point to manually change your filament.
Print times on an X1C are as follows (I would add more machines, but unfortunately this is the only machine I have available atm):
Single filament: Enter ~20min, Exit ~18min, both ~31min
With 1 filament change: Enter ~25, Exit ~22min, both ~35min