Gardena to 8mm pneumatic dripping tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gardena pipe connector to 8mm pneumatic tube (5.5mm inner diameter)
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
didn’t find a cheap adapter so I made one. To use with 8mm pneumatic like this:
just use hot water to heat up the tube for like 10 seconds and push over smaller end. it should be watertight once cooled down. If not use a small pipe clamp.
use the O-ring of another Gardena adapter or get one of these cheap O-ring set and use the 16 x 2.4 mm one.
https://amzn.eu/d/h7O8nNf
Edit 30.05.2025
made the inner walls thicker to increase stiffness and water tightness
Infill:
100%
support:
no
material:
PLA/PETG (better)
Orientation:
print vertically