1 / 4
Creality K1/K1C Auxilary Fan Carbon Filter — zdjęcie 1
1 / 4

Creality K1/K1C Auxilary Fan Carbon Filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Better clearance for K1/K1C and split into individual Parts for easier printing. With and without threaded insert.

Ocena
5 / 5
Polubienia
11
Pobrania
39
Wydruki
1
Wyświetlenia
752
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Scaled version of GreenPanda's filter case for the K1 Max aux fan. Made it a bit smaller to get better clearance on K1/K1C (Less height, just as wide as the fan itself).  Beefed up the flimsy internal grille. 

Split it into two parts to be glued together. Prints easier and with less supports. 

I used carbon foam as used in kitchen hoods, aquariums or solder-vapor filters. Fan should be set to at least 80% to start turning and make enough pressure 

2 versions included, one for M3 threaded insert (5,7mm in length or shorter), one with tighter hole so the screw cuts itself into the plastic. Print the cap without top/bottom layers and use the infill pattern as mesh as you like (I used mesh infill, 5mm line distance). 

Tagi