wake tower gopro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
gopro mount that keeps the camera pointed at the skier.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
mount that attaches just below the tow point on a wake tower. The tow rope guides the camera so that it is always pointed at the person in the water.
requires 3 5/16-18 x 1 1/5 socket cap head screws and nuts
This was designed to fit the wake tower of a 2016 Yamaha AR240, but it should work with others as long as the tube it clamps to has a diameter of 1.9 inches. If that's not your case, I did include the parametric inventor file so you can customize it to your boat.
I recommend printing in PETG, ASA/ABS, or another UV-resistant filament that is not prone to creeping when warm, such as PLA.
It currently overshoots a bit when you go out wide, but I'm working to fix that.