wake tower gopro mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
gopro mount that keeps the camera pointed at the skier.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 55
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
mount that attaches just below the tow point on a wake tower. The tow rope guides the camera so that it is always pointed at the person in the water.
requires 3 5/16-18 x 1 1/5 socket cap head screws and nuts
This was designed to fit the wake tower of a 2016 Yamaha AR240, but it should work with others as long as the tube it clamps to has a diameter of 1.9 inches. If that's not your case, I did include the parametric inventor file so you can customize it to your boat.
I recommend printing in PETG, ASA/ABS, or another UV-resistant filament that is not prone to creeping when warm, such as PLA.
It currently overshoots a bit when you go out wide, but I'm working to fix that.