1 / 1
Mingda Magician X: X-axis Ribbon Cable Strain Relief Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be inserted in the rightmost hole of the x-gantry. To insert the cable, slide it in from the bottom before plugging it in. Reverse is done to disconnect it.
I personally would recommend PETG or TPU for this; 0.2mm max layer height with 4 perimeters. Infill doesn't matter. PLA can work, but the clips are more prone to breaking.