Mingda Magician X: X-axis Ribbon Cable Strain Relief Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
X-axis 20 pin ribbon cable strain relief bracket for the Magician X. Easy clip on.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be inserted in the rightmost hole of the x-gantry. To insert the cable, slide it in from the bottom before plugging it in. Reverse is done to disconnect it.
I personally would recommend PETG or TPU for this; 0.2mm max layer height with 4 perimeters. Infill doesn't matter. PLA can work, but the clips are more prone to breaking.