ESP32 nrf24l01+pa+lna bluetooth jammer BLE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a pcb that hold an esp32 board and 2 nrf24l01+pa+lna
- Ocena
- 3 / 5
- Polubienia
- 37
- Pobrania
- 422
- Wydruki
- 0
- Wyświetlenia
- 8761
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna
I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen.
The case also have 2 holes to store the antennas safely.
The case have a small hole so a part of 1.75mm filament can be squished on a side and used to press the boot button from the esp board.
I've printed everything with 0.3mm layer height
I HAVE CREATED ONLY THE 3D MODEL, NOT THE CIRCUIT OR THE CODE
More details about the code can be found here: https://github.com/smoochiee/Noisy-boy-esp32-Bluetooth-jammer
It's intended to be used only for educational purprose only.