NanoGrip Micro – Ultra-Compact Adhesive Cable Tie Hook (7x5x5.5 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tame cable chaos in tight spaces with this 3D-printed mini hook!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The NanoGrip Micro is a tiny, permanent adhesive hook designed to securely hold cable ties in cramped environments. With compact dimensions of 7mm (L) x 5mm (W) x 5.5mm (H), it fits seamlessly behind devices or inside electronics. Simply glue it in place and snap in a cable tie for instant organization!
Features
Permanent adhesive base: Flat 7x5mm underside for strong bonding (use epoxy or super glue).
Durable design: Reinforced hook opening (⌀ 3.2mm) grips standard cable ties tightly.
Stealthy size: Discreet profile avoids bulk in tight spaces.
3D-print optimized: Support-free, minimal material use.
Supported cable tie sizes: 1,5 to 2,5mm wide and up to 2 mm high.
Print Settings
Layer height: 0.2–(I used 0.22 mm)
Speed: Very slow (~10 mm/s) for layer adhesion (critical for small parts!).
Infill: 30% (any pattern you like)
Material: PLA/PETG (tested with PETG).
Orientation: Print lying flat (hook facing up).
Tips
Clean the base: Sand the underside lightly for better glue adhesion.
Avoid bad overhangs: Consider using supports.
Patience pays: Slow printing ensures strength in tiny details.