NanoGrip Micro – Ultra-Compact Adhesive Cable Tie Hook (7x5x5.5 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tame cable chaos in tight spaces with this 3D-printed mini hook!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The NanoGrip Micro is a tiny, permanent adhesive hook designed to securely hold cable ties in cramped environments. With compact dimensions of 7mm (L) x 5mm (W) x 5.5mm (H), it fits seamlessly behind devices or inside electronics. Simply glue it in place and snap in a cable tie for instant organization!
Features
Permanent adhesive base: Flat 7x5mm underside for strong bonding (use epoxy or super glue).
Durable design: Reinforced hook opening (⌀ 3.2mm) grips standard cable ties tightly.
Stealthy size: Discreet profile avoids bulk in tight spaces.
3D-print optimized: Support-free, minimal material use.
Supported cable tie sizes: 1,5 to 2,5mm wide and up to 2 mm high.
Print Settings
Layer height: 0.2–(I used 0.22 mm)
Speed: Very slow (~10 mm/s) for layer adhesion (critical for small parts!).
Infill: 30% (any pattern you like)
Material: PLA/PETG (tested with PETG).
Orientation: Print lying flat (hook facing up).
Tips
Clean the base: Sand the underside lightly for better glue adhesion.
Avoid bad overhangs: Consider using supports.
Patience pays: Slow printing ensures strength in tiny details.