1 / 3
Apple IIe 15 or 9 pin Solder bucket D-SUB port cover VGA — zdjęcie 1
1 / 3

Apple IIe 15 or 9 pin Solder bucket D-SUB port cover VGA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows the use of solder bucket D-Sub connectors to be protected and facilitates the insertion of interface cards

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Allows the use of solder bucket D-Sub connectors to be protected and facilitates the insertion of interface cards in the slots in front of the 9 pin D-Sub cutouts on an Apple //e.

Comes as two parts to make fitting easier.

Thread the IDC end of the ribbon cable through the slot in the rear of the Apple //e then through the sub shell and fix with two #4/40 hex fittings.

Cover can be fitted on the rear with two M3, #4/40 UNC or self tapping screws (Pre thread is UNC for authentic reasons). There is a slot in the cover to allow up to fifteen way cables to exit.

100% infill and flip the cover to print face down or the slot will sag.

 

Tagi