1 / 3
Apple IIe 15 or 9 pin Solder bucket D-SUB port cover VGA — image 1
1 / 3

Apple IIe 15 or 9 pin Solder bucket D-SUB port cover VGA

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows the use of solder bucket D-Sub connectors to be protected and facilitates the insertion of interface cards

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Allows the use of solder bucket D-Sub connectors to be protected and facilitates the insertion of interface cards in the slots in front of the 9 pin D-Sub cutouts on an Apple //e.

Comes as two parts to make fitting easier.

Thread the IDC end of the ribbon cable through the slot in the rear of the Apple //e then through the sub shell and fix with two #4/40 hex fittings.

Cover can be fitted on the rear with two M3, #4/40 UNC or self tapping screws (Pre thread is UNC for authentic reasons). There is a slot in the cover to allow up to fifteen way cables to exit.

100% infill and flip the cover to print face down or the slot will sag.

 

Tags