120 fan case extension for UM790 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design enables replace the original cover and fan with a much bulkier 120mm fan I had laying around.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
This design enables replace the original cover and fan with a much bulkier 120mm fan I had laying around (bequiet pure 120mm).
As I connected m2 nvme egpu to the mini pc (k43sg), the cable prevented the original heatsink and fan to properly operate so I crimped a connector on a standard fan.
I also replaced the internal wifi antennas with external ones like makept suggested.
The extension (spacer) is bolted in the minipc using the original threads and contains small magnets. The fan received glued magnets in all screw-holes to attach to the case extension.
There is no feet to the spacer as I completed the model with a custom filter on which the original rubber feet are attached (https://www.printables.com/model/1305734-filter-cassette-for-custom-case-120-mm-fan).
The pictures shows the complete assembly, with filter and fan.
I printed it in abs (form futura reform) to not worry about creeping due to temperature. That was probably overkill.
The mini computer sits on top of an egpu, which is not the coolest air he could get but I have had no issues after one year.