Gyroscopic Fidget Ring (2 in 1 Fidget)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey guys! This is a fidget ring which spins and also acts as a gyro when its not on your finger! Enjoy!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
What makes it special
On my finger, this ring spins. Take it off, and it works a lot like a gyro. That second use is what makes it a 2 in 1 fidget, and it prints in place, so it works right off the print bed.
It is small and fast, too. The average size prints in less than 8 minutes. There are 9 provided sizes, from 16mm to 24mm. The 16mm ring size measures 23.33 x 23.33 x 8.35.
Print settings
Infill: 100% (it is very minimal, so this really does not make much of a difference)
Infill Type: Rectilinear
Perimeters: +2
Filament: PLA or PETG (choose whatever suits you)
Good to know
For a custom size, the guide works for all common slicers. Import the design into your slicer, starting with 16mm. Click the measuring tool, hover around the inner diameter, and click it when the ring around the inner diameter appears. A little box will appear with a number inside it. Halve your measured finger size, because the slicer takes the radius, not the value you measured for your finger. Insert that halved value, and that is it.
In the Bambu Studio and Anycubic Next Slicer profiles, the rings have the bed numbers labeled as their size for reference.
I like hearing about makes, questions, and requests.
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.