Gira to JUNG LS 990 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts devies like power sockets and switches form the Gira 55mm system to the JUNG LS 990 system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v3.0
I have Jung LS 990 frames all around my house, which are nice, but most third party devices, especially smart switches and such, are made for the Gira 55mm system. This is a simple adapter to fill in the space in between the device and the LS frame. I've also designed a version where you can easily switch out the plate to vary colors for instance here.
Make sure to align the tabs on the bottom adapter such that they are where there's no screws, otherwise it won't fit. The tabs will cause the whole thing to push itself in.
Note: AFAIK you should never print things for your high voltage electronics out of standard filaments, since they will burn easily! I've used ASA filament with UL94 HB certification. Doing some tests confirmed this will just melt and it will try and extinguish the flame. Use this is at your own risk!