1 / 1
3/8" square drive chuck adapter plate for 3-jaw chuck (Work in progress) — zdjęcie 1

3/8" square drive chuck adapter plate for 3-jaw chuck (Work in progress)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An accessory adapter plate to mount buho29's 3 jaw chuck to a 3/8ths square drive.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is an accessory/addon to buho29's 3 jaw chuck. I wanted to be able to mount it on my drill so I could use it like REALLY rough lathe for sanding and other random rotationally symmetrical needs.

The socket was designed to ASA B5.38 spec (or as close as a printer can get). I ran it tight on purpose with the intention of it having a more solid connection and hopefully better alignment.

I would recommend PETG at minimum.

23/May/2025 - I am fine-tuning the tolerances as of now.

Tagi