Fussy Cut Quilt Block Templates

This model is a set of five templates to help you with fussy cut quilt blocks. They range from 2 inch to 6 inch finished size with ¼ inch seam allowance. Blocks are cut at 2 ½ inch to 6 ½ inch square.

The templates are embossed with text showing the size. This can be easily painted in slicer to print with MMU, or simply use one color.

The text on the top of the cover can also be painted for coloring with MMU in slicer, or use one color.

There are pockets for magnets to hold the cover to the base to store the template set. You will need (12x) neodymium magnets that are 12mm diameter x 3mm thick. 6 magnets go in the base and the other 6 go in the cover. The magnets will be placed sort of in the center of the base and cover (see picture). The other picture shows where the pause goes with a 0.20 layer height. (The layer number will be different if you use different layer height.) The base magnets get inserted right before layer at 11.80mm is printed. The magnets in the cover are inserted right before layer at 3.80mm.

All of the magnets should be placed in their pocket with the same polarity orientation. The easiest way to ensure this is to take a stack of magnets, put a mark on the top one, slide that magnet off the stack, and put a mark on the top of the second magnet. Repeat this for 12 magnets. Then when the print pauses, insert the magnets with the marked side up.

I used these magnets, but I’m sure others will work as well. https://www.amazon.com/dp/B0CCXJQJNF  (This is NOT an affiliate link)

Supports are required under the handle of the templates. 

Supports are NOT required on the base or cover parts.

I hope you like ❤❤ this model!!

Happy Printing!! 🎉🎉 and Happy Quilting!! 🎉🎉