Fractal North Stacked HDD Cage Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows stacking 2 HDD's with the Factal North HDD Cage
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This allows stacking 2 HDD's with one of the Fractal North HDD cages. Probably works for other HDD cages as well.
The print is intended to printed 2 times. One in the current orientation and one mirrored. I forgot to do that in my final print, but it still worked with one side facing the wrong way.
I installed bottom HDD like Fractal intended with the rubber inserts on the metal, put my print on top and then attached the screw. For the top HDD I squeezed the rubber insert in between the gap and then put the screw in. That way the vibrations of the HDD are still quiet down by the rubber inserts
There are a few mm space between the HDD's so they don't vibrate on each other
The reason I created this was because I got an AIO in the front which resulted in not enough space for both HDD cages. If have the space you can also use this to place 4 instead of 2 HDD's in the Fractal North Case.
Printed with PETG, 10% infill and 3 walls