1 / 6
Furniture leg low profile screwing base — zdjęcie 1
1 / 6

Furniture leg low profile screwing base

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Furniture leg low profile screwing base for Walteco folding furniture leg

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

The furniture legs from Walteco have a screw-on foot with which the height of the furniture leg can be adjusted.
The furniture leg was 5mm too long for me. Therefore I designed a foot which is 5mm thinner than the original but has the same 42mm thread and a pitch of 2.5mm.

On the pictures the black foot is the original one and the white one is the 3D printed one.

With the attached STEP file the model can also be edited for longer feet if needed.

The model can be printed without support, but should be printed with a layer height of 0.1mm, otherwise the thread will not work properly.

The model could also work with other brands but has not been tested.

 

Here is the link to the original website from the Czech Republic:

https://www.walteco.cz/sklopna-noha--prumer-50-mm--vyska-710-mm--seda/

 

Here is the link to the hardware store where I bought the product in Germany:

https://www.bauhaus.info/moebelfuesse/walteco-moebelfuss-klappbar/p/27135859

 

 

Tagi