1 / 6
Furniture leg low profile screwing base — image 1
1 / 6

Furniture leg low profile screwing base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Furniture leg low profile screwing base for Walteco folding furniture leg

Rating
0 / 5
Likes
1
Downloads
18
Makes
0
Views
122
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution

The furniture legs from Walteco have a screw-on foot with which the height of the furniture leg can be adjusted.
The furniture leg was 5mm too long for me. Therefore I designed a foot which is 5mm thinner than the original but has the same 42mm thread and a pitch of 2.5mm.

On the pictures the black foot is the original one and the white one is the 3D printed one.

With the attached STEP file the model can also be edited for longer feet if needed.

The model can be printed without support, but should be printed with a layer height of 0.1mm, otherwise the thread will not work properly.

The model could also work with other brands but has not been tested.

 

Here is the link to the original website from the Czech Republic:

https://www.walteco.cz/sklopna-noha--prumer-50-mm--vyska-710-mm--seda/

 

Here is the link to the hardware store where I bought the product in Germany:

https://www.bauhaus.info/moebelfuesse/walteco-moebelfuss-klappbar/p/27135859

 

 

Tags