Minimalistic electric tealight holder with light diffuser (minilamp)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tealight holder or tealight-based minilamp. Prints with no supports. Light diffuser to be printed in vase mode
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
The holder prints easily. The inner radius is 40 mm. You can try to print the holder with low layer height to get smoother surface or experiment with the Fuzzy Skin option.
I printed it in Prusament rPLA (Algae) - the color is nice but a bit transparent with the default number of perimeters.
To print the light diffuser use the vase mode with no bottom layers and some bright filament. Please share your realization if you'll also use fuzzy skin. The inner radius is ca. 38 mm so you may upscale it in the slicer if your electric tealight is bigger.
Make sure to use the light diffuser with electric tealights only to avoid causing fire!
The electric tealights on the picture are from Flying Tiger shop.
Happy printing :)