Internal Mounting Bracket Plate for Kodiak Sidewinder Power Step LH Side
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick model generated off of my existing LH Plate (Drivers side). I did not print this but it is a 1:1 model
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Left-hand side internal mounting plate for a Kodiak Sidewinder that lives inside of the weatherproof box. This is the plate that the 210 Series motor bolts to (replacement gears for the motor are available on my profile as well!).
I did not print this but I had to cut my old motor off of the plate and figured it would be good to scan, reverse engineer and generate a model for it. The FreeCAD file is included which also contains the scanned image should you need to do further modifications.
I would imagine this plate would survive if printed out of ASA, Nylon, CF Nylon or higher.
¼" Bolts with Nylock nuts seem to fit pretty well for this when mounting a new plate, I had to destroy the original fasteners by cutting them off and punching the bolt out.