1 / 2
Core one top cover magnets (6x6mm round magnet) — zdjęcie 1
1 / 2

Core one top cover magnets (6x6mm round magnet)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

i had some left over magnets, and wanted easy access to the top of the printer. 6x6 round magnets should press fit.

Ocena
5 / 5
Polubienia
4
Pobrania
22
Wydruki
1
Wyświetlenia
309
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

First model so i hope it works for you all :) 

Removed the nylon rivets from my top cover so it is just held down by the magnets stuck to corner screws. works great for me at least. 

6x6mm round magnets should be press fit and leave a 1mm gap so there is room for the screws. 

 

Printed in pla, but you can use whatever 

Tagi