1 / 8
Tatonka Saddlebagholder for XYZ-Bikes, TrudeTrailer and similar — zdjęcie 1
1 / 8

Tatonka Saddlebagholder for XYZ-Bikes, TrudeTrailer and similar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder to put an old Tatonka Saddlebag on a 25mm-square-tube like used in XYZ-Cargoikes or TrudeTrailer.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

You will need

2 M5x40 screws
2 self-locking nuts M5

optionally 
4 M3 x 15 or M3 x 16 screws
4 M3 nuts

The M3 screws are used to prevent delamination of the layers. You can omit them for lightweight bags.

FreeCad files included to modify the model.

Use 0.1 mm ply height to achieve a light snap.

The clamp should be printed on the side to achieve the best stability.

Tagi