1 / 8
Tatonka Saddlebagholder for XYZ-Bikes, TrudeTrailer and similar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder to put an old Tatonka Saddlebag on a 25mm-square-tube like used in XYZ-Cargoikes or TrudeTrailer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
You will need
2 M5x40 screws
2 self-locking nuts M5
optionally
4 M3 x 15 or M3 x 16 screws
4 M3 nuts
The M3 screws are used to prevent delamination of the layers. You can omit them for lightweight bags.
FreeCad files included to modify the model.
Use 0.1 mm ply height to achieve a light snap.
The clamp should be printed on the side to achieve the best stability.