Creality Falcon A1 laser engraver Schlauchadapter / Hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Schlauchadapter für Creality Falcon A1 Hoseadapter vor Ceality Falcon A1
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 804
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter for a spiral hose from a 50W fume extractor (e.g., available on Amazon) with a hose diameter of 60mm, suitable for the Creality Falcon A1 exhaust port.
The adapter offers 90-degree rotational mounting—left, right, up, or down—with the hose screwing into a threaded connection. Its design ensures a snug fit; however, slight upscaling may be necessary to accommodate variances in filament calibration or type. Customizations for 360-degree rotation or 45-degree increments are available upon request. A magnetic version is under consideration, though not strictly required. For enhanced sealing, the user may optionally apply foam tape or double-sided adhesive to the collar and/or utilize sealant/silicone on the hose threads.
Connection for a spiral hose from a 50W fume extractor, with a hose diameter of 60mm... suitable for the Creality Falcon A1 exhaust pipe outlet....
The connection can be mounted in 90-degree increments, i.e., left, right, up, or down... the hose is screwed in (thread in the connection). The connection is designed for a very precise fit (snug fit). If it gets too tight, e.g., due to a different filament calibration or other filament, scale it up a bit. If anyone wants a 360-degree twist or 45-degree increments, I'd be happy to change it and upload it later. I'm also considering making a version with magnets, although this isn't absolutely necessary. The connection can also be additionally glued and sealed to the collar with foam tape or double-sided mounting tape, if desired. If necessary, additionally seal the hose/thread with sealant/silicone.