Creality Falcon A1 laser engraver Schlauchadapter / Hose adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Schlauchadapter für Creality Falcon A1 Hoseadapter vor Ceality Falcon A1
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 110
- Makes
- 0
- Views
- 801
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter for a spiral hose from a 50W fume extractor (e.g., available on Amazon) with a hose diameter of 60mm, suitable for the Creality Falcon A1 exhaust port.
The adapter offers 90-degree rotational mounting—left, right, up, or down—with the hose screwing into a threaded connection. Its design ensures a snug fit; however, slight upscaling may be necessary to accommodate variances in filament calibration or type. Customizations for 360-degree rotation or 45-degree increments are available upon request. A magnetic version is under consideration, though not strictly required. For enhanced sealing, the user may optionally apply foam tape or double-sided adhesive to the collar and/or utilize sealant/silicone on the hose threads.
Connection for a spiral hose from a 50W fume extractor, with a hose diameter of 60mm... suitable for the Creality Falcon A1 exhaust pipe outlet....
The connection can be mounted in 90-degree increments, i.e., left, right, up, or down... the hose is screwed in (thread in the connection). The connection is designed for a very precise fit (snug fit). If it gets too tight, e.g., due to a different filament calibration or other filament, scale it up a bit. If anyone wants a 360-degree twist or 45-degree increments, I'd be happy to change it and upload it later. I'm also considering making a version with magnets, although this isn't absolutely necessary. The connection can also be additionally glued and sealed to the collar with foam tape or double-sided mounting tape, if desired. If necessary, additionally seal the hose/thread with sealant/silicone.