Knipex Cobra Water Pump Pliers perpendicular Multiboard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard perpendicular mount for Knipex Cobra Water Pump Pliers
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 127
- Wydruki
- 3
- Wyświetlenia
- 498
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Multiboard mount for Knipex Cobra Water Pump Pliers in various sizes that positions the pliers perpendicular to the wall. This allows the pliers to only use a single 25mm row of space on the multiboard.
Files are available for 3 sizes of the wrenches. Each wrench has a different width and Knipex appears to only have 2 sizes of the “button”. The slot for the button is angled so it pushes the wrench towards the wall. Due to the multiboard directional snap being flat on the bottom, the heavier wrenches sometimes pull the snap out of the multiboard if you pull the wrench away from the wall. If you lift the wrench vertically the snap remains in place.
STEP files are also uploaded so you can modify the width of the slot for other sizes not supplied here.
Model numbers used for the available mounts are:
- 87-01-125
- 87-01-250
- 87-01-300
Printed in PLA with standard Multiboard print settings:
- 0.4mm nozzle
- 0.2 layer height
- 3 walls
- 15% infill (Gyroid)
- 4 top and bottom layers
STL files have proper print orientation, no supports required.