8mm Cine Film Drive Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick design for a drive wheel for an 8mm cine scanner I am in the process of designing.I designed it with…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a quick design for a drive wheel for an 8mm cine scanner I am in the process of designing.
I designed it with 10 sprockets as the stepper motor I am using is 200 steps per revolution. Therefore to advance one frame I need to advance the motor 20 steps once the framing is aligned.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Yes
Supports:
No
0.2
Infill:
10%
Notes:
I used a raft, simply because of the small area touching the bed when printing was resulting in poor adhesion. I think that was more to do with the bed levelling than anything else. Your mileage may vary.
Category: Hobby
