8mm Cine Film Drive Wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick design for a drive wheel for an 8mm cine scanner I am in the process of designing.I designed it with…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a quick design for a drive wheel for an 8mm cine scanner I am in the process of designing.
I designed it with 10 sprockets as the stepper motor I am using is 200 steps per revolution. Therefore to advance one frame I need to advance the motor 20 steps once the framing is aligned.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Yes
Supports:
No
0.2
Infill:
10%
Notes:
I used a raft, simply because of the small area touching the bed when printing was resulting in poor adhesion. I think that was more to do with the bed levelling than anything else. Your mileage may vary.
Category: Hobby
