1 / 3
paint mixer - add your 1/4 - 6mm shaft — zdjęcie 1
1 / 3

paint mixer - add your 1/4 - 6mm shaft

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remade the model so that you dont have to print the shaft, which was bound to be long and probably not strong

Ocena
0 / 5
Polubienia
4
Pobrania
48
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I remade the model so that  you dont have to print the shaft, which was bound to be olong and probably not particularly solid. 

it now has a hole to fit a ¼ inch or 6mm dowel of your choice.  

I tried it, and it fit perfectly on the first try (the hole is slightly large with little bumps to grip the shaft tightly).

it worked well to mix a very small batch of cement and then another of plaster.  Be awra, the wood shaft, while better than a plastic one, has a lot of flex, so you can't run that thing at 10 000 RPMs, or move it around too quickly… although in my case, as I moved it and it would deflect at least ½ inch sometimes if I moved to fast, and didn't break. 

EDIT: tried it with paint.... it's a little small for a paint gallon, but it works.  You just have to move it around a lot..  

Tagi