Paint Mixer / Stirrer
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
- Pobrania
- 337
- Polubienia
- 84
- Ocena
- 5
202 modeli
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
2 different propellers, clockwise and counterclockwise. First glue the propeller to the stick. Stick is made for cordless screwdrivers with 7 mm drill chuck. Rotation propeller has a diameter of 50 mm, so the edge and the inside of the…
Needed a stick to stir some spar varnish with, but didn't have anything handy: made one. For use with a quart sized container (approx 1L). Scale as you please… Print instructions Download. Slice. Print. Summary Print. Stir. How I Designed…
This is a easy printable sugar bag container with a part dedicated to the coffee stirrers. Perfect companion for instant espresso machines like nespresso. Print instructions Just print it and fill it.
I needed a stirring stick but didn’t have anything suitable, so I designed one that’s the perfect size and thickness to handle viscous silicone without breaking. It printed perfectly in PETG and worked great. The design is simple and…
Another drink stirrer that I created as a souvenir for our pontoon patio crawl.
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…
Two sizes: 70mm and 40mm diameter. Watch the Video: https://www.instagram.com/reel/CkjCa6CjjpO/?utm_source=ig_web_copy_link Like it? Please don’t forget a like any maybe a follow, thanks a lot 😊 For more Project’s and insights, see my…
Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…
Design criteria: It had to be usable in the field or the lab. Therefore, it had to be compact and easy to store and transport, ……and that includes the magnetic stirrer bar….. And it would need to run on batteries, As it also had to double…
A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…
My own designed Horse Stirrup. One day, not that long ago. I ended up in a horse-shop. When browsing I saw a stirrup made out of plastic. In that time and place I got the idea of this design. At the moment we are in Beta with our design.…
I don't always empty my resin vats, nor do I use them within 48 or so hours so the resin separates in the tank. I noticed the gray I have is particularly bad, it can want to settle out by the end of a long print. It sat for about 3 days…
A drill attachment for 3/8" / 10mm drills. This print is designed to be printed standing up. I recommend printing with a brim. but no supports required. Designed to stir 1 gal paint cans, but usable and helpful for larger and smaller…
Beim mixen von 2K Massen habe ich immer wieder das Problem, dass dabei viele Luftbläschen eingerührt werden. Durchs Vakuumieren wird es deutlich besser, aber ich wollte einen Rührstab der weniger Luft ein mischt. Deshalb ist dieser sehr…
Quick and easy paint stirrer, designed to print in 20 minutes using only 10g of filament! Length of the stick is 230mm so it should print on most 3D printers! ✨If you like what I make ✨ Like, follow, comment, share, review, and post your…
Mezclador para taladro diseñado para impresion 3D Utiliza una tuerca de 3/8" y una varilla roscada o tornillo de 3/8". puedes usar el largo de la varilla de acuerdo al uso que le des. Puedes limpiarlo despues de cada uso para seguir…
Drink stirrer ideal for a birthday party
Farbrührer mit M6 Fassung. So können massive Gewindestäbe als Rührstab dienen. Ursprung ist der Paintmixer von: https://www.printables.com/de/model/123197-paint-mixer-40mm-diameter-for-small-paint-cans
Print in different colors to use them as drink identification at parties! Use 0.3mm layer height
A giant version of the controversial McDonalds coffee stirrer. Prints in 6 parts + pins. Includes all parts, with pins and instructions. Happy to answer any questions you may have.
The Bose headsets are well liked by pilots, but the model produced in the early 2000s has weak plastic yokes that break. This is a printable replacement. My brother has used the headset with the printed yokes for over 4 years with no…
Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…
This Propeller was designed to be the same like from the CW1 Washing Station from Josef Prusa but with Magnets (4 Ø x 8mm) that will be embedded in to the Print.…
Míchací vrtule k uchycení na závítovou tyč s lůžkem pro matici M6. Stirring propeller to be attached to a threaded rod with a seat for an M6 nut.
Not happy with the capsule kind for my SH-3 20 watt motor stirrer. Accepts up to 14mm magnets up to 10mm tall. Epoxy them in. Category: Tools
The magnets used are 6mm diameter by 3mm thick. The spacing is 20mm center to center. Don't forget to get the polarity of each magnet correct. There is only 0.1mm of clearance in the design for the magnets. They slipped in perfectly for…
This is a stirrer sized to fit a solo cup. It's useful for mixing up epoxy. The 10mm shaft should fit most 3/8" drill chucks.
This is a simple compact magnetic stirrer made to help mixing up photographic chemistry, though it could be used for other chemical mixing purposes. The idea is based on a number of DIY projects seen on YouTube that use an old computer…
5mm square shaft should work with most drills. PETG ideal, but you could print from anything and dispose after use. Be careful using it on high speed! It can create a strong vortex and potentially splash.
Swizzle Sticks about 14cm long
Update 04/08/2020: I finally got around to installing a PWM for speed control. It works as expected, and I'm very happy with it. So far I have been using it for mixing Calcium and Alkalinity solutions for my marine aquarium as well as for…
Coffee Organizer for Coffee Corner Enhance your coffee station with this stylish and functional Coffee Cup & Stirrer Organizer . Designed to hold different cup sizes and neatly store stirrers, this model is perfect for home, office, or…
I have an Anycubic Photon UV resin printer and washing the printed parts has always been a bit of a faff. I saw ChickenHaunt's magnetic stirrer parts on Thingiverse and thought it was a great idea, so printed them. Unfortunately, I found…
0,2mm PLA mk3s+ deer napkin rings→ https://www.printables.com/cs/model/683424-napkin-ring
I needed to mix the paint in a 25 liter barrel. The narrow neck of the barrel did not allow the use of conventional stirrers. That's why I designed a thin stirrer, which can be inserted into the narrow neck of the barrel in a helical…
I got sick of breaking matchsticks every time I tried to mix some of my old Humbrol and Airfix paints. So I decided to print something simple. Plus try our adaptive layer height in Simplify3d. I used a 0.4 nozzle and printed straight on…
Instructions: Cut the fan from its frame and remove the blades. Place the 2 magnets 1 next to the other and mark their upper side. glue the magnets on the fan, with the marked side facing the same direction. or use the bracket. Prepare…
This is a portable magnetic stirrer I designed for field titrations. It's perfect for field titrations, or for operating in environments without 240V power, such as fridges or glove boxes. This stirrer uses a pair of AA rechargables*, or…
I needed a small plastic stirrer for mixing polyurethane resin for casting. Doing it manually seemed OK, but the distribution of dye left something to be desired - so I made a stirrer :-) Works perfectly! Doesn't mix very aggresively -…
Simple wall attachable holder for Kennwood Cooking Chef XL (and compatible) stirrers. Just use two screws to attach to wall.
Designed to fit on the "magic wand" hand massager, holds 2 Vallejo paint droppers. Alternative to using a vortex mixer.
Fusion 360 file with parameters hole diameter and blade length. Default hole diameter is 8mm. Designed to be easily cleaned and reused. Use superglue to guarantee a strong fit. Dowel used with 6.15mm hole diameter: https://amzn.to/411BeUb…
i created this octa xylophone/stirring drum to bring music closer to the kids. a simple instrument which can be used for performances or for fun. I printed: the stirring drum and the ball in PLA, 0,4 Nozzle, 0,2mm layer high, 2 outer…
Print at any settings, I just used my default 0.2 Layer Height setting and they come out fine. I'd recommend using a brim or raft just to help it to not peel up.
Material: PLA layer height: 0.2 Shells: 3 Infill: 30% Electronics: Nema 17 with a Mechaduino controller, this is overkill but I had it on hand. Magnets: These are also overkill and too powerful, I would find smaller magnets and redesign.…
Disposable stirrer for coffee, tea,...
Silly little jig for engraving slogans on coffee stirrers. My office uses this size as do most of the starbucks I've been in. The stirrers are not all perfectly straight, so you might have to tape them down (or just select the best ones.…
Paint Can Opener: Provides better angled lift than a screwdriver. Use two for stubborn can. Places on the back side for magnets. Choice of two each 4mm and 6mm, and one 8mm, all 2mm thick. Hangup hole for 6mm. I used PLA at 0.20 layer, 4…
Magnetic stirrers can cost more than 100 bucks. This one less than 5! Here's what you need: 120 mm PC case fan (4 free when already used, e.g. from your old PC) Voltage modifier (see picture, https://www.ebay.de/itm/266028052543 ) 2…
Make your own resin part washing station for cheap. Print part with 100% infill so it does not float. Pickle Jars Magnetic Stirrer Extra Stir Bars (If you use more than one jar) Print Settings Infill: 100 Thanks for checking out my model…
Rührwerk für Flüssigkeiten. Als Antrieb wurde ein alter 12V 120mm PC-Ventilator verwendet. Dieser wird über eine Spannungsreglerplatine 2596 geregelt. Auf der Platine wird das Trimmpoti ausgelötet und durch ein Poti 10K Ohm mit parallelem…
Cocktail stirrer with a lab on top. Recommend to at least use PETG so you can wash before use.
Designed these to stir acrylic paint jars. Use a drill at slow speed.
This cooling bowl stirrer is an open-hardware accessory designed to be compatible with the Aillio R1 and R2 coffee roaster cooling bowls. By actively agitating the beans during cooling, it: Speeds up heat dissipation Improves airflow…
Hello readers this is a small project I had done over the weekend. I needed a magnaeic stirrer at work, but because of some circumstances we couldn't order one. So I thought why shouldn't I build one by myself. I designed this thing with…
This is my own design of a fairly compact magnetic stirrer. It uses two 9V batteries which power a LED Strip to indicate it is running (only for fun) and a 24V PC-fan. The case has cutouts for a power switch and a turning potentiometer,…
(10) 4mm wide octagon by 100mm long stirrers My intent is to use them to mix paint by number paint container pots. I made them 100mm long so they are comfortable in the hand. I chose an octagonal profile so they don't require support to…
Small stirrer Stick to fit 1/4 Hex, powered Screwdriver. I made this to stir paints and glues. I made this from PETG, but PLA would probably work. It does not need support, but I would recommend a brim. I printed at 80% fill, for added…
Created using two ellipsoids in AutoDesk NetFabb2024, one fitted inside the other. One is moved to the side, then subtracted with Boolean operation. Finally, a cylinder for the handle, and a sphere (twice cut) to make the end. Cut handle…
This magnetic stirrer uses a PC fan, a Mosfet, Potentiometer a few magnets and some wires. The purpose of this device is to stir with a rotating magnet without having contact inside the bottle/erleymeyer except for the single magnet. I…
This adaptor fits onto a pretty standard personal massage device that you just may have laying around. This particular adaptor is fit for an arboleaf massager but I've attached the fusion file so that you can edit the adaptor to fit any…
M8 Spiral Drill Mixer A compact six-blade spiral mixing paddle designed for use with a standard M8 × 1.25 threaded rod and a drill or cordless screwdriver. The curved blades generate a strong axial flow, making the mixer suitable for…
3D gedruckter Magnetrührer für das Hobbylabor oder die Küche aus PLA [Bauteil Auflistung] PC Fan Step Down Modul Poti Kippschalter Ladebuchse Kabel //english: 3D printed magnetic stirrer for the hobby lab or kitchen. [component listing]…
This nifty attachment should solve all your life's problems by leveraging the great idea behind static mixer nozzles. Bent and stuffed into a spiral tube, it will surely make mixing faster and more fun. Originally made to fit portable…
Remixed the spiral sculpture into a paint mixer. Fixed the original since the loops were touching, this one everything is detached and I added a couple of turns too. Print as it shows standing straight up with supports touching bed & brim…
No support. Final project is 90mm(height)by 27mm(diameter). Needles are purchased from amazon. 1 package with 10 pieces. The needle total length is 80mm, tip is 50mm and end is 30mm. The the needle will drop fit into the base holes. I…
Hi I designed these stirrers to a party with my grand children I printed with PLA to be food compliant have fun Print Settings Printer Brand: FlashForge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 200 Infill: 20% Triangle…
My Bosch OptiMUM Series 9 food processor came without any stand or holder for its tools whasoever. So I designed this fairly simple stand for the interchangeable stirring tools. The design is based on those for the current 2025 Series 9…
This is a Vacuum Chamber optimized for Epoxy or Polyurethane mixing. You can place it on a magnetic stirrer and stir the solution while in vacuum. I printed it from PLA and tested successfully. I also made the Seal CAD to print from TPU…
This is a DIY magnetic stirrer I designed to upgrade my old "pc-fan-approach" Things needed: 1x 300mm GT2-belt 2x 608zz or 608rs bearings 1x M8x40mm or M8x50mm bolt 1x M8 Locknut 1x 2212 Brushless motor (I used an A2212/13T with 1000KV)…
5v dc magnetic stirrer designed to mix isopropyl alcohol to clean sla prints components dc plug https://www.amazon.com/gp/product/B07VTZX2RK/ref=ox_sc_act_title_1?smid=AJJYA8M5YMCKV&psc=1 5v dc motor…
Hey everyone! Another day, another Halloween decoration! This time, I decided to create a cute set of cocktail stirrers featuring cats, pumpkins, bats, and spiders. Each piece has its own child-friendly charm and fits perfectly into your…
stirrup plug for BMW x5 E53
Cocktail stirring stick at two different lengths (10 cm and 20 cm)
A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…
A friend of mine asked me for a lid for his Self Stirring Mug. You should use the original O-Ring/Gasket from the original lid for the best seal against coffee leakage.
This is a very versatile OpenSCAD app that will let you create a wide variety of tools with different profiles and uses: spatulas, moulding tools, sanding blocks and paint stirrers (and what you can imagine). Some STLs are included as…
Made it as a gift to my father who works alot with chainsaws and why not upload it if someone else may enjoy it too
This system assists with easy and consistent film development by enabling automatic agitation in a Paterson System 4 developing tank. It is sized for a NEMA-17 type stepper motor. I drive my motor with an Arduino microcontroller and…
A magnetic stirrer is a desktop helper to mix any liquid solution. This is probably one of the simplest way to make one, as it involves a reduced number of parts that can be reclaimed ones. With brand new parts, this build will cost you…
Hot Pepper Drink Stirrer. I added text (not in the stl - modify to add your own) for our Pontoon Patio Crawl. The g-code file includes a stop for a filament change from Red to Green.
The cheapest second-hand magnetic stirrer I could find was €75. That's a lot of dough for some magnets on a motor. So I designed my own, based on some old PC fan's and magnets I had laying around. You cut off the fan blades with a pair of…
I use Mainstays 46 cup storage containers for parts washing for my Saturn. Picked up a INTLLAB magnetic stirrer off amazon, and found it was smaller than I was expecting. This keeps the container stable on top of the stirrer. I printed…
Eccentric hole makes paint go brr when put in a electric drill, preferably a really fast one with a wall plug Put a ball bearing in your paint bottle This thing is all walls, print upright Requires: 1 M4x40mm flat top bolt 2 M4 washers 2…
Třmínek lze přišroubovat pomocí vrutu. Doporučuji tisk z ASA. Stirrup can be instaled by the screw. Print from ASA.
magnetic stirrer I use a fan of 3D printer, 60*60*15mm I use 2 magnet and one controller speed for engine the the links in the description. You will also need a power supply in 12V. You will set the fan and the controller speed engine…
Print with more perimeters to increase strength.
Holder for coffee stirrers that fits the Keurig K-Supreme. Could also be used for other utensils/objects. Should fit snugly over the body of the machine, but double-sided tape could be used to fully secure it. Printed in PETG for…
A mixing/applying thing for glue. Could not find one on Thingiverse, so I designed one. Print Settings Printer: SOVOL SV01 Rafts: No Supports: No Resolution: any Infill: 100% Filament: DEVIL DESIGN PETG Clear Category: Tools