Yamaha SEQtrak phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This stand holds a phone (like the iPhone 15) above the SEQtrak, and it also works with my Arturia Minilab stand system.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This stand holds an iPhone 15 Pro (or similar) above the Yamaha SEQtrak for convenient ergonomic placement when using the SEQtrak app. If you end up using this, I'd appreciate a like and comment!
This also works with my previous Arturia Minilab SEQtrak stand, for the ultimate setup. You can even see it in action in my YouTube video here featuring this setup.
There is a left side (phone side) and a right side, which simply slide on from either end of the SEQtrak:
There are 10mm circular indents meant to accept these rubber feet from Amazon, which help to keep things from sliding around.
If you don't want to use a phone/app, you can also just print two of the right side pieces, and have a simple desktop stand for the SEQtrak itself:
I chose to print in PETG, and it will print without supports as shown (with the circular indents having a ‘teardrop’ shape to allow a max overhang of 45 degrees):
Enjoy!