1 / 4
Firetruck Piggy Bank with Custom Name — zdjęcie 1
1 / 4

Firetruck Piggy Bank with Custom Name

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed a hollowed out firetruck with a coin-insert slot and a removable backplate. Scale the size of each in slicer.

Ocena
5 / 5
Polubienia
5
Pobrania
39
Wydruki
2
Wyświetlenia
203
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I designed a firetruck piggy bank with a removable backplate. It is huge, so it must be scaled down in the slicer. The backplate was designed to fit an 88% scale of the firetruck, so be sure of the size comparison before printing. I included the .f3d model of each to allow the custom name and words to be modified. I printed on Neptune 4 Plus using PETG Rapid by ELEGOO at 30% infill and tree support everywhere. I used a flat-head screw driver to break the support from the inside and carefully pulled the support under the ladder to avoid breaking it.

Tagi