Firetruck Piggy Bank with Custom Name
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed a hollowed out firetruck with a coin-insert slot and a removable backplate. Scale the size of each in slicer.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 39
- Makes
- 2
- Views
- 203
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
I designed a firetruck piggy bank with a removable backplate. It is huge, so it must be scaled down in the slicer. The backplate was designed to fit an 88% scale of the firetruck, so be sure of the size comparison before printing. I included the .f3d model of each to allow the custom name and words to be modified. I printed on Neptune 4 Plus using PETG Rapid by ELEGOO at 30% infill and tree support everywhere. I used a flat-head screw driver to break the support from the inside and carefully pulled the support under the ladder to avoid breaking it.