1 / 5
Heavy Duty Drag Link Chain PFTE Guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of upgraded drag link a with chassis mount to suit ILYAS Top.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first attempt at modifying and designing something for the AD5M.
I have done this to suit the ILYAS top enclosure.
Heavy Duty Drag Link
I found with the existing drag links that it could be difficult to fit them together, and also they would be very tight tolerances in the gaps.
To combat this I did the following:
- Added a chamfer to the leading edge of the links
- Opened the tolerances on the link height by .01mm each side
- Opened up the tolerances of the link holes by .01mm
- Added a chamfer to the leading edge of the top and bottom clips where they mount to the frame
- Modified the top and bottom frame mount clips to suit the ILYAS top enclosure.