1 / 5
Heavy Duty Drag Link Chain PFTE Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of upgraded drag link a with chassis mount to suit ILYAS Top.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is my first attempt at modifying and designing something for the AD5M.
I have done this to suit the ILYAS top enclosure.
Heavy Duty Drag Link
I found with the existing drag links that it could be difficult to fit them together, and also they would be very tight tolerances in the gaps.
To combat this I did the following:
- Added a chamfer to the leading edge of the links
- Opened the tolerances on the link height by .01mm each side
- Opened up the tolerances of the link holes by .01mm
- Added a chamfer to the leading edge of the top and bottom clips where they mount to the frame
- Modified the top and bottom frame mount clips to suit the ILYAS top enclosure.