1 / 7
Newhaven 7 inch display with Raspberry Pi 4B case. Single power cable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Raspberry Pi 4B with 30mm fan and the Newhaven 7" screen. Screen uses same 5V power as the RPi so only 1 cable
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pretty straightforward, can use any cables you wish to but I will link what I used:
Just Print, screw on the Rpi4, snap in the fan, screw in the screen and assemble. Last 4 screws hold it all together.
This was created as an attempt to learn F360 and modeling in general, I hope it helps others.
Parts:
- Newhaven NHD-7.0-HDMI series screen
- Rpi4
- 30mm fan (I used a spare Canakit one laying around)
- 4x M3x6 screws for attaching screen (I used hex head but can use any)
- 4x M3x30 screws for screwing the case together (I used hex head but can use any, hex head will give a nice look on the bottom though)
- 4x M2x6 screws to attach the RPi4
- Short HDMI → HDMI Micro Cable
- Power splitter
- 90 degree USB-C Power dongle
- Beefy Power Supply