1 / 7
Newhaven 7 inch display with Raspberry Pi 4B case. Single power cable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Raspberry Pi 4B with 30mm fan and the Newhaven 7" screen. Screen uses same 5V power as the RPi so only 1 cable
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pretty straightforward, can use any cables you wish to but I will link what I used:
Just Print, screw on the Rpi4, snap in the fan, screw in the screen and assemble. Last 4 screws hold it all together.
This was created as an attempt to learn F360 and modeling in general, I hope it helps others.
Parts:
- Newhaven NHD-7.0-HDMI series screen
- Rpi4
- 30mm fan (I used a spare Canakit one laying around)
- 4x M3x6 screws for attaching screen (I used hex head but can use any)
- 4x M3x30 screws for screwing the case together (I used hex head but can use any, hex head will give a nice look on the bottom though)
- 4x M2x6 screws to attach the RPi4
- Short HDMI → HDMI Micro Cable
- Power splitter
- 90 degree USB-C Power dongle
- Beefy Power Supply