1 / 5
AirTag & Moto Tag mount for MTB Fork Bike Steering Tube 31.9mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AirTag & Moto Tag mount for MTB Fork Bike Steering Tube 31.9mm
- Ocena
- 4,667 / 5
- Polubienia
- 45
- Pobrania
- 269
- Wydruki
- 3
- Wyświetlenia
- 1552
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (67)Powiązane
This cap fits both: AirTag and Moto Tag. It is a press fit, so make sure it holds with enough force. My inner tube diameter is 31.85mm (Rockshox ZEB Select+). Pressing force was about 5 kg. If your steering tube is wider you can wrap ptfe/duct tape around the cap to increase the diameter and friction. The varaint with drainage holes will be easier to remove later on.