Yamaha P45 Piano Stand - DIY Yamaha L-85
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piano stand for my P-45 piano, DIY replacement of the L-85 Stand. This design contains wood plans and 3d print bracket
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 462
- Wydruki
- 3
- Wyświetlenia
- 1665
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Create a robust and budget-friendly stand for your Yamaha P45 piano, especially if the original L-85 is unavailable. Made from 3 pieces of pine, customize the height to suit your needs (e.g., 600mm or ~685mm). Simple assembly using your preferred joinery. Features optional 3D printed brackets for a super solid feel (alternative: standard brackets).
Approx. $50 AUD build cost for timber, printed components and finishing products.
Timber:
- Stretcher: 1 piece of Dressed Pine - 1285mm x 185mm x 19mm
- Legs: 2 pieces of Dressed Pine - 600mm x 285mm x 19mm each
- Note: Leg height can be adjusted. 600mm allows both legs from a single 1200mm piece of lumber if it's at least 285mm wide.
3D Printed Parts (Optional but Recommended):
- 2 x Mounting Brackets (see the attached model files)
Hardware & Fasteners:
- Materials to attach stretcher to legs (e.g., pocket screws, wood glue, dowels)
- 4 x Small wood screws (to attach 3D printed brackets to the wooden stand)
- 4 x M5 40mm bolts or machine screws (to attach the piano to the 3D printed brackets)
- If using alternative store-bought brackets, fastener type may vary.
Tools & Finishing:
- Saw (if timber is not pre-cut to length)
- Drill / Screwdriver
- Sander / Sanding paper / Hand plane (for smoothing edges and surface preparation)
- Your choice of finish (e.g., wood stain, paint, varnish)
- Measuring tape
- Pencil
The assembly.pdf contains the assembly details.
