NCASE M2 Plexiglass holders

For this project you'll need some plexiglass around 355mm x 245mm (they usually sell them at 12"x16" online) I used 1/16" thick, around 1.5mm and some short m3 nuts and bolts, I think I used ones that were 6mm long 

To cut it up, I used a track saw to cut to dimension and a drill to make holes for the 3D print. Be careful drilling to not really push down or the acrylic crack, I used a marker with the prints to mark the holes. make sure to also leave like 20 mm of space on the sides to prevent colliding with some extrusions on the case 

Alternatively could probably laser cut it