NCASE M2 Plexiglass holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some brackets to hold up a custom plexiglass screen for the NCASE M2
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
For this project you'll need some plexiglass around 355mm x 245mm (they usually sell them at 12"x16" online) I used 1/16" thick, around 1.5mm and some short m3 nuts and bolts, I think I used ones that were 6mm long
To cut it up, I used a track saw to cut to dimension and a drill to make holes for the 3D print. Be careful drilling to not really push down or the acrylic crack, I used a marker with the prints to mark the holes. make sure to also leave like 20 mm of space on the sides to prevent colliding with some extrusions on the case
Alternatively could probably laser cut it