1 / 7
OmniWall Panels
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OmniWall Panels for accessory design use (not designed for printing)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
I made these panels to help with designing accessories and planning my garage layout.
The panel sizes are the nominal values (i.e. 16in x 32in) for simplicity. Real panels are slightly undersized (i.e. 15.9in x 31.9in) to aid with proper spacing when mounting.
Other dimensions for the holes and slots are based on measurements I took from one of my 16in x 32in panels.
Disclaimers:
- I only have 16in x 32in panels to compare with. The other sizes are based on assumption that all other features and spacing are consistent between models.
- These were not designed with the intention of printing them. It may work, but that hasn't been tested and the 1.55mm thickness is too thin for reliable use as a printed piece.