1 / 7
OmniWall Panels
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OmniWall Panels for accessory design use (not designed for printing)
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 46
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made these panels to help with designing accessories and planning my garage layout.
The panel sizes are the nominal values (i.e. 16in x 32in) for simplicity. Real panels are slightly undersized (i.e. 15.9in x 31.9in) to aid with proper spacing when mounting.
Other dimensions for the holes and slots are based on measurements I took from one of my 16in x 32in panels.
Disclaimers:
- I only have 16in x 32in panels to compare with. The other sizes are based on assumption that all other features and spacing are consistent between models.
- These were not designed with the intention of printing them. It may work, but that hasn't been tested and the 1.55mm thickness is too thin for reliable use as a printed piece.