Pulley roller (directional change)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A roller I made for a clothes line, internal gap is 4mm, requires a single M3 nut and bolt / machined screw.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I hung up a clothes line, a singular one.
Found out my batches are usually quite large, so i needed a second line. Instead of making 2 new holes to hang the line, i simply anchored one side and changed the direction so that I had it in a triangle. Instead of two straight lines. This also helps with the tension of the line, as i only need 1 spring to tension essentially two lines.
Tested (measured using a luggage scale) at 21 kg of pulling force when printed at 25% infill using CF PETG. Don't use a material that gets brittle in the sun, or from water.
Other then the mounting hole, it requires a single M3 nut and bolt/screw. The roller has a gap of 4MM which is larger then the most common 2mm clothes line that's silicon/plastic covered with a metal core..