1 / 2
3rd Gen Toyota Tacoma Phone Holder — zdjęcie 1
1 / 2

3rd Gen Toyota Tacoma Phone Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Phone holder for 3rd gen Toyota Tacomas

Ocena
0 / 5
Polubienia
39
Pobrania
176
Wydruki
0
Wyświetlenia
1926
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There are two sizes to accommodate thinner thicker phone cases. I am more than happy to make variations for whatever size you need! STEP file also available for your editing needs! 

Print in ASA, ABS, or PETG. Needs to withstand heat and being in the sun! I printed mine in ASA at a .2mm layer height, 25% gyroid infill. 

The tape I used is 3M VHB tape.  There is a small recess on the back for the tape to stick onto, this helps keep the holder flush. Make sure to get the 0.98 width tape! 

Link for the tape I recommend: https://www.amazon.com/dp/B0CPVFYLDC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Tagi